The key features of our New Generation Fully Automatic Thermoforming Fill & Seal Lines with Breakthrough Cup Cutting Technology® system are :

  • The bottom plastic film transporting is done by a servo driven chain
  • Homegeneous formed cups thanks to the Servo Motion Chain holding the bottom foil
  • Bottom foil is always transported with the same repeat length thanks to chain technology
  • Easy maintenance access of system both in-line and off-line without having to cut the paper banderoles
  • Absence of unnecessary stoppage time for maintenance
  • No need to re-adjust sealing and cutting stations due to superior servo driven chain system
  • When an operator starts up a conventional machine for the first time for real production, there is always about 5 meters of bottom foil waste before all stations are ready. Not so on our machine, there is only 60 cm waste from the beginning and this results in significant production savings.
  • Simple and easy photocell adjustment is needed only one time Because of servo driven chain system repeat length always stays the same
  • Our new generation machine does not stop during a new bottom plastic roll change as the chain transports the taped film to the end of the machine in seconds without any risk of being stuck
  • Remote diagnostics and remote maintenance is also available (Remote monitoring and diagnostics available )

Product to be packed


Specifications TR-ALP 10 2x5 (Pneumatic) TR-ALP 10 2x5
(Full Servo)
TR-ALP-12 2x6
(Full Servo)
TR-ALP 15 3x5
(Full Servo)

Industrial Output
Production Output
Plastic Film Pitch
Plastic & Lid Film Width
Plastic Film Thickness
Plastic Materials
Lid Materials
Cup Height
Machine Dimensions
Machine Dimensions with auto.cartoners

20 cycles/min
12,000 cups/hr
142mm
Up to 150mm
0,5mm – 0,85mm
PS – PP – PET
ALU – ALUPET
95mm max
L:8200 x W:1230 x H:2400 mm
L:12000 x W:6400 x H:2400 mm

24 cycles/min
14,500 cups/hr
142mm
Up to 150mm
0,5mm – 0,85mm
PS – PP – PET
ALU – ALUPET
95mm max
L:8200 x W:1230 x H:2400 mm
L:12000 x W:6400 x H:2400 mm

24 cycles/min
17.280 cups/hr
134mm ( 64x64 )
399-422mm
0,55mm - 0,6mm
PET - PP - PS
ALU – ALUPET
70-75mm max
8500 x 4300 x 3500 mm

24 cycles/min
21,600 cups/hr
213mm
Up to 222mm
0,5mm – 0,85mm
PS – PP – PET
ALU – ALUPET
95mm max
L:8200 x W:1230 x H:2400 mm
L:12000 x W:6400 x H:2400 mm

CONTACT US


İkitelli OSB Mahallesi Eskoop Sitesi C1-1 Blok No:27 Başakşehir / İstanbul
nesip.ayvali@istanbulpack.com
+90 532 353 91 80 / +90 212 671 98 90